Enabling Scan to E-mail
To enable the Scan to E-mail feature:

1. On the control panel, press the Log In/Out button.
2. Press the Select button below the display to select System Settings.
   • Use the numeric keypad to enter the Password. The default password is 11111.
   • Press the Select button to select Confirm.
3. Select Print Settings, and then press the Enter button.
4. Press the Select button until you see Software Option on the display, and then press the Enter button.
5. Use the numeric keypad to enter the Software Option password for Scan to E-mail, and then press the Enter button. The password can be found on the inside cover of the Scan to E-mail Instructions.

Configuring Scan to E-mail
After Scan to E-mail is enabled, follow these steps to configure Scan to E-mail on your network.

Set the Administrator E-mail Address

General Information
1.1 Features
The TM-U220 is a POS printer that can print receipt paper (paper roll). The TM-U220 is designed to be compatible with existing systems built around a TM-U210.

1.1.1 General

• Compact and lightweight.
• 3 model types are provided. (See “Printer types” (page 1-2))
• Excellent reliability and long life due to adoption of a stepping motor both for moving the carriage and for paper feeding.
• Can be installed hanging on the wall with an optional hanging bracket (only for type B, D).

1.1.2 Printer handling

• Easy drop-in paper loading and easy maintenance
• Cable connectors are housed in the bottom of the printer.
• Built-in two drawer kickout interface connectors
• Built-in autocutter (for type A or B)
• Built-in take-up device (for type A)

1.1.3 Printing

• High-speed printing through logic-seeking control
• Two-color printing (black and red)

About Your Printer
Your printer has a built-in Ethernet interface and can connect anywhere on your network using 10Base-T or 100Base-TX. The built-in Ethernet interface automatically selects the correct link speed and network protocols when it connects to the network.

The network interface supports multiple protocols and automatically detects the protocols being used on your network. You can print from Microsoft® Windows® and Mac OS® X applications.

If you want to configure the network interface to use TCP/IP and SNMP network protocols, use EpsonNet Config. The configuration utility is provided with your printer, and allows you to quickly and easily configure the network interface.

Note: The EpsonNet Config utility configures the network interface to work only with protocols that exist on your network. This does not imply that you can use all of the above-mentioned protocols on your network or operating system. The protocols that the network interface can use may vary depending on the operating system and the network configuration.